Chapter 4. FUNCTION BLOCK
4 - 12
This shows the errors on the output variable “STAT” of variables and the resolutions in accordance with them.
STAT
No.
Local/
Remote
Descriptions
Resolutions
0
Operating with no fault
-
1
The base location number is exceeding the proper
setting range
Correct the number in accordance with the proper range(See
Section 4.2)
2
H/W error of the base
Contact the service station.
3
The slot location number is exceeding the proper
setting range
Set the right number to the slot mounting the high speed
counter module.
4
The high speed counter module on the slot is empty
Mount the high speed counter module to the specified slot
5
The module loaded isn't the high speed counter
module
Mount the high speed counter module to the specified slot
6
The channel number is exceeding the proper range
Specify the available channel correctly
7
H/W error of the high speed counter module
Contact the service station.
8
The high speed counter module's shared memory
error
Contact the service station.
9
Local
The available channels are not specified
Make a correct specification of the available channel on the
initialization function block
128
H/W error of the communication module for remote
See the manual for the remote communication module
129
The base location number is exceeding the proper
setting range
Corsets the number in accordance with the proper range(See
Section 4.2)
131
The slot location number is exceeding the proper
setting range
Set the right number to the slot mounting the high speed
counter module
133
The module loaded isn't the high speed counter
module
Mount the high speed counter module to the specified slot
135
H/W error of the high speed counter module
Contact the service station.
136
The high speed counter module's shared memory
error
Contact the service station.
137
Remote
The available channels are not specified
Make a correct specification of the available channel on the
initialization function block
4.4 Error code on the function block