manualshive.com logo in svg

LG F6V1009WTSE, Owner'S Manual

Share
Download
LG F6V1009WTSE Owner'S Manual Download Page 73

73

TROUBLESHOOTING

ENGLISH

Customer Care and Service

Contact an LG Electronics customer information centre.
•  To find an LG Electronics authorised service personnel, visit our website at 

www.lg.com

 and follow the instructions found there.

•  Self-repair is not recommended as it could further damage the device and void the 

guarantee.

•  Spare parts referenced in Regulation 2019/2023 are available for a minimum 

duration of 10 years.

Your home 

appliance and 

smartphone are 

not connected to 

the Wi-Fi network.

The wireless network name (SSID) is set incorrectly.

•  The wireless network name (SSID) should be a combination 

of English letters and numbers. (Do not use special 

characters).

The router frequency is not 2.4 GHz.

•  Only a 2.4 GHz router frequency is supported. Set the 

wireless router to 2.4 GHz and connect the appliance to the 

wireless router. To check the router frequency, check with 

your internet service provider or the router manufacturer.

The distance between the appliance and the router is too 

far.

•  If the distance between the appliance and the router is too 

far, the signal may be weak and the connection may not be 

configured correctly. Move the location of the router so that 

it is closer to the appliance.

Symptoms

Possible Cause & Solution

global_main.book.book  Page 73  Sunday, October 16, 2022  2:53 PM

Summary of Contents for F6V1009WTSE













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands