48
OPERATION
5
Open the door after it unlocks itself
and add or remove necessary
clothing items.
6
Close the door and press the
Start/
Pause
button.
NOTE
• For safety reasons, the door remains
locked when the water level or
temperature inside of the drum is
high. It is not possible to add clothes at
this time.
Delay End
You can set this function so that the
appliance starts automatically and
finishes after a specified time interval.
1
Press the
Power
button.
2
Select a washing programme.
3
Press the
Delay End
button as
necessary.
4
Press the
Start/Pause
button.
NOTE
• Except for LED of the
Delay End
button, all LEDs on the control panel
will be turned off within 20 minutes.
This feature may vary depending on
the model purchased.
• The delay time is the time to the end of
the programme, not the start. The
actual running time may vary due to
water temperature, clothes and other
factors.
• To cancel the function, the
Power
button should be pressed.
• Avoid using liquid detergent for this
function.
Using the ezDispense
Use the
Dispenser 1
and
Dispenser 2
buttons to set up and control the
ezDispense
function.
A
Dispenser 1
button
B
Dispenser 2
button
C
Buttons indicator
D
Liquid detergent indicator
E
Link indicator (Using only liquid
detergent both compartments)
F
Buttons indicator
G
Liquid fabric softener indicator
NOTE
• Whether the detergent or softener
indicator may blink and the chime may
sound, even if there is sufficient
detergent or softener left to use for
approximately 2 to 4 washing
programmes;
- If the liquid detergent indicator
D
and buttons indicator
C
,
F
blink
and the chime sounds, pour the
global_main.book.book Page 48 Sunday, October 16, 2022 2:53 PM
