LG F6V1009WTSE Owner'S Manual Download Page 71

Page: 71 / 76

TROUBLESHOOTING

ENGLISH

ezDispense

Musty or mildewy

odour in appliance

Odours can occur if the drain hose is not properly

installed, causing siphoning (water flowing back inside of

the appliance).

• When installing the drain hose, make sure that it does not

get kinked or blocked.

If the detergent dispenser is not cleaned regularly,

odours can occur from mold or foreign substances.

• Remove and clean the detergent dispenser, especially the

top and bottom of the dispenser’s opening.

Symptoms

Possible Cause & Solution

Refill Alarm

continues to

display when

detergent/

softener is added.

Detergent/softener has built up on the fluid level sensor.

• Open the compartment covers and clean the insides of the

ezDispense

compartments with warm water. Use a soft

brush to remove any residue. If the

Refill Alarm

displayed continuously, call for service.

The amount of detergent/softner is not enough for the

sensor to detect.

• Fill the detergent/softner up to the

MAX

line in the

compartment.

Too much/too

little detergent or

softener

dispensed.

The default dispense amounts setting may need to be

changed.

• Check and change the default dispense amounts setting.

The ezDispense

doesn't dispense

detergent/

softener.

The ezDispense function is off.

• Turn on the

ezDispense

function.

The ventilation holes are blocked.

• Clean the ventilation holes for the lids on the

compartments with warm water.

Symptoms

Possible Cause & Solution

global_main.book.book Page 71 Sunday, October 16, 2022 2:53 PM

Summary of Contents for F6V1009WTSE













































































Search results

Summary of Contents for F6V1009WTSE

Reviews:

Brands by name

Popular brands

LG F6V1009WTSE, Owner'S Manual

Search results

Summary of Contents for F6V1009WTSE

Reviews:

Brands by name

Popular brands