56
TROUBLESHOOTING
Steam Functions (Steam Models)
Problem
Possible Cause
Solutions
Water drips from nozzle
when STEAM CYCLE
starts
This is normal.
This is steam condensation. The dripping
water will stop after a short time.
Garments still wrinkled
after Steam Fresh
TM
Too many or overly different
types of garments in dryer.
Small loads of 1 to 5 items work best.
Load fewer garments. Load similar types
of garments.
Creases or pleats are
gone from garments
after Steam Fresh
TM
The function of this cycle is to
remove wrinkles from fabric.
Use an iron to replace creases and pleats
in garments.
Garments have static
after using the Reduce
Static option
This is normal.
The amount of static experienced will
depend on the individual moisture level in
the skin.
Garments are too damp
or too dry after using
the Reduce Static
option
Correct drying options not
selected.
Select the load weight manually before
starting the Reduce Static option.
Garments are not
uniformly damp after
using the Easy Iron
option
Number of garments or load
size not properly selected at the
beginning of the cycle.
Select the correct number of garments or
load size before starting the cycle.
Steam does not
generate, but no error
code is shown
Water level error.
Unplug dryer and call for service.
Water drips from door
during STEAM CYCLE
This is normal.
Condensation will normally form on the
inside of the dryer door during steam
operation. Some condensation may drip
out the bottom of the door.
Steam is not visible
during STEAM CYCLE
This is normal.
Steam vapor is difficult to see when the
door is closed. However, condensation
will normally form on the inside of
the dryer door if the steam system is
operating normally.
Drum does not turn
during STEAM CYCLE
This is normal.
The drum is turned off so that the steam
vapor remains in the drum. The drum will
normally turn for about 2 seconds once a
minute.
Cannot see steam
vapor at the beginning
of cycle
This is normal.
Steam is released at different stages of
the cycle for each option.
Odors remain in
clothing after Steam
Fresh
TM
Steam Fresh
TM
did not remove
odor completely.
Fabrics containing strong odors should be
washed in a normal cycle.
Summary of Contents for DLEX7800 E Series
