LG DLEX3885C, Owner'S Manual

Page: 41 / 148

ENGLISH
BEFORE CALLING FOR SERVICE
(cont.)
Problem Possible Causes Solutions
Steamdoesn’t
generate but no error
code is shown.
• Water level error. • Unplug dryer and call for service.
Garments still
wrinkled after
STEAMFRESH
™
.
• Too many or too different
types of garments in dryer.
• Small loads of 1 to 5 items work best.
• Load fewer garments. Load similar-type garments.
There are no creases
left on garment after
STEAMFRESH
™
.
• The function of this cycle
is to remove wrinkles from
fabric.
• Use an iron to make creases.
Garments have
static after REDUCE
STATIC.
• This is normal. • Depends on individual moisture level in skin.
Garments are too
damp or too dry after
REDUCESTATIC.
• Correct drying options not
selected.
• Select load weight manually before starting
REDUCE STATIC option.
Garments are not
uniformly damp after
EASYIRON.
• This is normal. • Depends on the amount or type of garments.
Water drips from door
duringSteamCycle.
• This is normal. • This is steam condensation on door surface.
Steamisnotvisible
duringSteamCycle.
• This is normal.
• Steam vapor is difficult to see when the door is
closed.
Drum does not turn
duringSteamCycle.
• This is normal. • The drum is turned off so that the steam vapor
remains in the drum.
Cannot see steam
vapor at the
beginning of cycle.
• This is normal. • Steam is released at different stages of the cycle
for each option.
• MORE TIME button pressed.
Odors remain in
clothing after
STEAMFRESH
™
.
• STEAMFRESH
™
did not
remove odor completely.
• Fabrics containing strong odors should be
washed in a normal cycle.
The display shows
BULKY LOAD.
• Pressing the MORE TIME button several times will
set the cycle for a large load such as a comforter.
2 bars are displayed
In the LCD screen.
• Ductwork is slightly too
long or has too many
turns/restrictions.
• Partial blockage of the
ductwork due to lint buildup.
• Install a shorter or straighter duct run. See the
Installation Instructions.
• Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times
may be longer.
• If “END OF CYCLE” is displayed after the end of
cycle, it will be off in 4 minutes. If POWER button
is pressed or the door is opened, power will be off
immediately.
4 bars are displayed
In the LCD screen. • Ductwork is too long or has
too many turns/restrictions.
• Significant blockage of the
ductwork due to lint buildup
or debris.
• Install a shorter or straighter duct run. See the
Installation Instructions.
• Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times
may be longer.
• If “NEED FLOW CHECK” is displayed after the end
of cycle, it will be off in 2 hours. If POWER button
is pressed or the door is opened, power will be off
immediately.
END OF CYCLE
FIN DEL CICLO
FIN DE CYCLE
THE DUCTWORK HAS
A BLOCKAGE THAT NEEDS
TO BE REMOVED
IMMEDIATELY.
NEED FLOW CHECK
CHECK FILTER light
is on during the
drying cycle
• Lint filter is almost clogged
or full.
• Pause the drying cycle and clean the lint filter.
41
MFL62512806_EN_0208.indd 41 2010.2.8 2:7:54 PM