LG CRNN Series, Installation Manual

Page: 11 / 86

Installation of Wall Mounted Type Indoor Unit
11
Installation of Wall Mounted Type Indoor Unit
2. Connection of Pipings
1. To remove the front panel from the indoor unit,
remove the front panel from the indoor unit
cabinet.
■
Set the air direction louvers up-and-down to the
position(horizontally) by hand.
■
Remove the securing screws that retain the front
panel. Pull the lower left and right sides of the
grille toward you and lift it off.
(2.1/7, 2.6/9, 3.5/12 kW/Btu models: 2EA,
3.5/18 kW/Btu models: 3EA)
2. To check the drainage.
■
Pour a glass of water on the evaporator.
■
Ensure the water flows through the drain hose of
the indoor unit without any leakage and goes out
the drain exit.
Pull the right and
the left side.
Screw