background image

-9-

Cautions for general usage

Proper usage

Make sure that no child is 

allowed to use the prod-

uct.

The•product•weighs•too•

much•for•a•child•to•handle•

properly.

Make sure that no hand, 

foot, hair or cloth gets 

stuck in the rotating 

brush or wheel while 

using or cleaning the 

product.

It•may•damage•the•prod-

uct•and/or•injure•people.

No one other than a 

qualified technician/

service engineer from LG 

Electronics may disas-

semble, repair or modify 

the product.

It•may•cause•electric•

shock,•injury•or•fire.

Never use the battery 

and the charging station 

for other appliances than 

the product.

It•may•cause•malfunction-

ing•or•fire.

Do not use the battery 

from other appliances 

with the product.

It•may•cause•malfunction-

ing•or•fire.

Do not arbitrarily disas-

semble, remove or short 

circuit the battery.

It•may•cause•electric•

shock,•injury•or•fire.

Do not apply heat or 

shock to the battery.

It•may•cause•electric•

shock,•injury•or•fire.

Never insert a sharp 

metallic object such as 

an awl in the hole or gap 

on the product or the 

charging station.

Otherwise,•you•may•get•

injured•or•suffer•electric•

shock.

Make sure that no wa-

ter, beverage or deter-

gent may get inside the 

product or the charging 

station.

Otherwise,•you•may•get•

injured•or•suffer•electric•

shock.

Do not apply or spray 

flammable substance(-

gasoline or thinner) or 

surface active agent(de-

tergent or bath soap) on 

the product.

It•may•cause•malfunction-

ing•or•fire.

Bath

Goods

Gasoline

Thineer

Sham-

poo

If there is gas leak-

age(propane or urban 

gas), make sure to ven-

tilate the area first with-

out getting into contact 

with the product or its 

power plug.

Otherwise,•there•will•be•

sparks•which•cause•explo-

sion,•fire•or•injury.

Do not use or store a 

heating device or flam-

mable substance(ether, 

benzene, alcohol, chem-

icals, combustible spray, 

insecticide, air freshener 

or cosmetics) in close 

proximity to the product.

It•may•cause•malfunction-

ing•or•fire.

Summary of Contents for CordZero A9 Series












































Reviews: