LG CordZero A9 Series, Svc Manual

Page: 14 / 43

-14-
How to use
Note about using the product
What to be aware of about using the product
•
Make sure that the dust bin lid is on prior to using the
product. Otherwise, suction strength will deteriorate
and cleaning will not be satisfactory.
•
Support the bottom of the product when cleaning an
elevated surface.
•
While leaving the product unattended or not using the
product for extended period, make sure to properly put
it in the charging station or lie it on a floor. Otherwise,
the product may fall and get damaged or cause injury
to people.
•
Make sure that the exhaust filter is properly assembled
before using the product.
•
Environmental conditions such as temperature and hu-
midity may cause static on the product. Please contact
the customer service of LG Electronics if a same issue
persists.
•
Any foreign object on the inlet port or extension pipe
will prevent the product from proper operation. Make
sure to remove any foreign object such as a sock or
stocking before using the product.
•
Battery life will be shortened after using the product
for extended period thanks to its nature.
•
When battery is about to get fully discharged, the last
block on the battery indicator starts to flash and the
product will power off after a while. Fully charge the
battery in this case.
•
Please use the product at room temperature as the
battery life will deteriorate severely if used at tempera-
tures lower than 5℃ or higher than 38℃ for an extend-
ed period of time.
Using the product
1 Assemble the body, extension pipe, inlet, and battery
in that sequence.
제품 연결 버튼
연장관 길이 조절 버튼
Inlet port
Extension pipe
Battery
Product
body
2 Press the button on the extension pipe to adjust its
length.
•
The pipe has 4 lengths.
연장관 길이 조절 버튼
Extension pipe
length button
3
Attach the inlet to the body or extension pipe.
Extension pipe
4
Care
•
Using the product for a long time with the accessory
inlet port attached may overburden the motor.
•
Using the accessory inlet port on a TV, monitor or LCD
display may leave a scratch on the surface.
•
Apply caution to avoid getting your finger stuck in a
gap.
•
Any foreign object sucked during cleaning in the inlet
will stop the inlet in order to prevent damage to the
body or inlet. Remove the object before resuming
cleaning.