background image

4

SAFETY INSTRUCTION

EN

responsible for their safety. Children should be supervised to ensure 

that they do not play with the appliance.

• Do not allow the appliance to be used as a toy. Close attention is 

necessary when used by or near children.

• Do not allow children to play with or hang on the appliance.
•  Do not use the appliance with damaged power cord or plug. The cord 

must be replaced. If the appliance is not working as it should, has 

been dropped, damaged, left outdoors, or dropped into water, return 

it to an LG Electronics service centre.

• Do not pull or carry by cord, use cord as a handle, close a door on 

cord, or pull cord around sharp edges or corners. Do not run 

appliance over cord. Keep cord away from heated surfaces.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the 

cord.

• Place the cords from other appliances out of the area to be cleaned.

Battery

• Never use the battery, adapter, and the charging station from other 

appliances with this appliance. Use only the battery and the charging 

station provided by LG Electronics.

• Never use the battery, adapter, and the charging station from this 

appliance with other appliances.

• Do not disassemble, remove or short-circuit the battery.
• Have specifically designated battery packs replaced when it is no 

longer able to hold a charge.

• Refer to the 

Charging the Battery

 section instructions for the 

method of replacing the battery.

• When disposing of this appliance, follow regulations for disposal of 

rechargeable lithium-ion batteries.

• Follow all local ordinances and regulations when handling or 

disposing of the battery.

global_main.book.book  Page 4  Monday, July 13, 2020  4:53 PM

Summary of Contents for CORDZERO A9 K


















































Reviews: