background image

Connection

17

Connection

Connecting to a Desktop PC

* You can connect the projector to a computer of VGA, SVGA, XGA and SXGA output. 
* Refer to page 37 for the supported monitor displays of the projector.
* You can select an RGB input from the Monitor Out menu that will be output to RGB OUT(RGB1 or RGB2).

< How to connect >

Connect the 

RCB IN-1

of the projector and the computer output

port with computer cable.

* You can also connect to the RGB IN-2 port.

Connecting to a Notebook PC

< How to connect >

Connect the 

RCB IN-1

of the projector and the computer output

port with computer cable.

* If you set your computer to output the signal to both the display

of your computer and the external projector, the picture of the
external projector may not appear properly. In such cases, set
the output mode of your computer to output the signal only to
the external projector. For details, refer to the operating instruc-
tions supplied with your computer.

* You can also connect to the RGB IN-2 port.

Connecting to a Video Source

< How to connect 1 >

a. Connect the Video input jacks of the projector to the output

jacks of the A/V source with Video cable. 

< How to connect 2 >

b. Connect the S-Video input jack of the projector to the 

S-Video output jack of an A/V source with an S-Video cable.  
* You can get better picture quality when connecting 

S-Video source to the projector.

S VIDEO

(R) AUDIO (L)       VIDEO

OUT

IN

* You can connect a VTR, a camcorder or any other compatible video image source to the projector.

<VCR>

Summary of Contents for BX501B











































Reviews: