ENGLISH
Function
23
1.
Press the
MENU
button. Then, move to
OPTION
with the
∧
,
∨
,
<
,
>
buttons and press the
OK
button.
2.
Press the
∧
,
∨
buttons to move to
High Altitude
and press
the
OK
button.
3.
Press the
<
,
>
buttons to move to
On
and press the
OK
button.
• Press
the
BACK
button to exit the menu screen.
High Altitude Mode
* High Altitude Mode is used when the environment is higher than 1200 meters.
OPTION
Menu Language
: English
Blank Image
: Blue
Screen Capture
Lamp Mode
: Normal
Monitor Out
: RGB1
Set ID
: 1
Network Setting
High Altitude
: Off
3D Mode
ꔂ
Move
ꔉ
OK
< How to use >
1.
Press the
MENU
button. Then, move to
OPTION
with the
∧
,
∨
,
<
,
>
buttons and press the
OK
button.
2.
Press the
∧
,
∨
buttons to move to
Network Setting
and
press the
OK
button.
3.
Press the
<
,
>
buttons to move to
On
of
LAN
option.
4.
Press the
∧
,
∨
buttons to move to
IP Auto Setting
or
IP Manual Setting
press the
OK
button.
•
In most cases, you should select Auto. If you are using a router it will automatically
set the IP address.
• Select IP Manual Setting for ordinary PC.
- Setting PC: Set the Internet Protocol (TCP/IP) of the PC at your own discretion.
Setting Projector: Set
IP Address
as the IP Address format of PC, and select
Close
after entering the
Gateway
as the same Gateway of PC. Please refer to eZ-Net
Manager Guide for details of network setting.
:: example ::
IP Address
Subnet Mask
Gateway
PC
192.168.0.10
255.255.255.0
192.168.0.1
Projector
192.168.0.254
255.255.255.0
192.168.0.1
•
If
Network Setting
is not working, check your network conditions. Check the LAN cable connection.
• If
the
Network Setting
is not completed, network functions may not operate normally.
• IP
Auto
Setting
: Select it if there is a DHCP (Dynamic Host Configuration Protocol) server on the local area network
(LAN) via wired connection, the Projector will automatically be allocated an IP address. The IP
address will automatically be determined. Connection to DHCP may not be possible when the fire-
wall is installed or according to the model of the computer.
IP Manual Setting
: Select it if there is no DHCP server on the network and you want to set the IP address manually.
• Press
the
BACK
button to exit the menu screen.
< When select
IP Manual Setting
>
IP Address
ꔌ
1
9 2 1 6 8 0 0 0 2 5 4
ꔍ
Subnet Mask
2 5 5 2 5 5 2 5 5 0 0 0
Gateway
1 9 2 1 6 8 0 0 0 0 0 1
Close
ꔁ
Move
ꔉ
OK
OPTION
Menu Language
: English
Blank Image
: Blue
Screen Capture
Lamp Mode
: Normal
Monitor Out
: RGB1
Set ID
: 1
Network Setting
High Altitude
: Off
3D Mode
ꔂ
Move
ꔉ
OK
Close
IP Auto Setting
IP Manual Setting
Network does not exist.
Do you want to reset?
LAN
ꔗ
Off
ꔃ
Summary of Contents for BX327
Page 31: ...ENGLISH Information 29 MEMO ...
Page 63: ...Türkçe Bilgi 29 NOT ...
Page 95: ...INDONESIA Informasi 29 MEMO ...