LG BX327, Owner'S Manual

Page: 14 / 98

Installing and Composition
12
Turning on the Projector
1. Connect power cord correctly.
2. Remove the lens cap. If it is left on, it could become deformed due to the heat produced by the projection lamp.
3. Press the POWER button on the remote control or top cover.
(Green operation indicator flashes if lamp is in start-up cycle.)
ꔈ
An image will appear after the operation indicator light turns (Green).
ꔈ
Select the source mode with the INPUT button.
Turning off the Projector
* Do not disconnect the power cord during the suction/discharge fan in operation. If the power cord is disconnected during the
suction/ discharge fan in operation, it may takes longer to activate the lamp after turning on the power and the lifespan of the
lamp may be shortened.
ꔈ
If the operation indicator LED is orange and blinking, the power button on the top cover or on the remote control will not operate.
ꔈ
This projector features the Quick Power On/Off function that allows a user to turn it on and off quickly.
1. Press the POWER button on the top cover or remote control.
2. Press the POWER button on the top cover or remote control again to turn off the power.
3. If the operation indicator LED is orange and blinking, do not disconnect(30 sec.) the supply until the operation
indicator LED is lit constantly (orange).
* What is the Quick Power On/Off function?
The projector enters into Standby mode without waiting it is cooled.
When standby mode is maintained for about 4 minutes after turning off the projector, it operates immediately without cooling when
the set is turned on.
Please Press
Power Key again.
i Power off?