LG BX327, Owner'S Manual

Page: 29 / 98

ENGLISH
Information
27
Turn off the projector and unplug the power cable.
Carefully place on a cushioned surface.
(Allow the lamp to cool for 1 hour before
removing the used lamp from the projector.)
After lifting the lamp cover off, remove the two
retaining screws on the lamp case with a
screwdriver.
1
3
2
6
Insert the new lamp gently into the correct
position. Make sure it is inserted correctly.
7
Tighten the screws you removed in step 3.
(Make sure they are fixed firmly.)
8
Close the lamp cover and install the screws
from step 2 to install the cover.
(If the lamp cover is not installed correctly the
unit will not power on.)
Screws
Lift the lamp up from the projector.
4
Using another manufacturers lamp may cause damage to the projector or lamp.
Make sure the lamp cover is securely fastened. If the lamp cover is not installed correctly the
unit will not power on. If this fault persists contact an LG Authorized Service Center.
Knob
5
Pull out the handle slowly and remove the lamp
case.
Unscrew the screw from the lamp cover
using a screwdriver.
Lamp case screw