LG BP330 Service Manual Download

Page: 26 / 83

3-13

DIGITAL DISPLAY & MEDIA TRAINING MASTER

What cables is the customer

using to connect the BD?

YES

Determine what cables the customer is using to connect the BD to

the TV and if connected properly. Refer to OM for connections.

Tighten any loose cables. Make sure the customer is not connecting a

BD to VCR. Copy protection can distort the picture on older VCR models.

Is the TV set to the

correct input?

YES

Make sure the TV is on the correct input according to the

connections in use. Video when using composite, or component.

DVI when using DVI, and HDMI when using HDMI.

Is color fine

when watching multiple discs?

YES

One disc displaying the issue is a problem with the disc.

Make sure the discs the customer is using are compatible with the BD

by checking “playable discs” in the owners manual. Multiple discs

displaying the problem indicates a problem with the BD player.

Is color fine

when watching a TV program?

YES

If the cable or satellite programming is connected through another

input and the customer does not get color, the customer has a problem

with his television. If a TV program does have the color, the problem

may be the BD player, the cables being used, or the TV itself.

Is color fine when the BD is

connected to another TV?

YES

Connect the BD to another TV and play a disc.

Good color during disc play back indicates a problem with the first TV.

Please refer to the owners manual for instructions on how to connect

the BD to a TV. If the BD has a problem on the second TV,

then see service chart for service information.

Has the customer tried

another set of cables?

Have the customer try another set of cables. A bad cable

can also cause video problems. Test the cable with another device to

the TV to also determine if the TV is bad. If the BD is the problem,

please see service chart for service information.

3-2. Poor Color

The color is poor. Examples would be washed out colors, colors bleeding into one another, or a solid tint to

a screen.

Summary of Contents for BP330




















































































Search results

Summary of Contents for BP330

Reviews:

Related manuals for BP330

Brands by name

Popular brands

LG BP330, Service Manual

Search results

Summary of Contents for BP330

Reviews:

Related manuals for BP330

Brands by name

Popular brands