LG BP330 Service Manual Download

Page: 18 / 83

3-5

DIGITAL DISPLAY & MEDIA TRAINING MASTER

What cables is the customer

using to connect the BD?

YES

Determine what cables the customer is using to connect the BD to

the TV and if connected properly. Refer to OM for connections.

Tighten any loose cables. Make sure the customer is not connecting a

BD to VCR or BD to DVD Recorder. Copy protection can distort

the picture on older VCR models.

Is the TV set to

the correct input?

YES

Make sure the TV is on the correct input. Turn TV off, then on

to determine input. Video when using composite, or component.

DVI when using DVI, and HDMI when using HDMI.

Does shaking appear when

watching multiple discs?

YES

One disc displaying the issue is a problem with the disc.

Multiple discs displaying the problem could indicate the BD lens

needs to be cleaned. Recommend the customer use a lens cleaner

on the BD. A lens cleaner is available at any local electronics retailer.

Does shaking appear when

watching a TV program?

YES

Shaking appearing when watching a TV program indicates

n issue with the display. If the TV program is fine, then connect

the BD to another input on the display to determine if the problem

is following the BD.

Does shaking appear

when the BD is connected to

another TV?

YES

Connect the BD to another TV and play a disc. No shaking during

disc play back indicates a problem with the first TV. Please refer to

the owners manual for instructions on how to connect the BD to a TV.

If the BD has a problem on the second TV,

then see service chart for service information.

Has the customer tried

another set of cables?

Have the customer try another set of cables. A bad cable can

also cause video problems. Test the cable with another device to

the TV to also determine if the TV is bad. If BD is problem,

please see service chart for service information.

1-4. Shaky Picture

Distorted picture refers to the customer getting video, but there is a problem with the video.

Summary of Contents for BP330




















































































Search results

Summary of Contents for BP330

Reviews:

Related manuals for BP330

Brands by name

Popular brands

LG BP330, Service Manual

Search results

Summary of Contents for BP330

Reviews:

Related manuals for BP330

Brands by name

Popular brands