LG BP330 Service Manual Download

Page: 15 / 83

3-2

DIGITAL DISPLAY & MEDIA TRAINING MASTER

Objective: To provide clear and concise guidelines for customer service agents to handle calls on

box goods calls.

1. DISTORTED PICTURE

1-1. Lines on Picture

Distorted picture refers to the customer getting video, but there is a problem with the video.

What cables is

the customer using to

connect the BD?

YES

Determine what cables the customer is using to connect

the BD to the TV and if connected properly. Refer to OM for

connections. Tighten any loose cables. Make sure the customer

is not connecting a BD to VCR or BD to DVD Recorder.

Copy protection can distort the picture on older DVD models.

Is the TV set

to the correct input?

YES

Make sure the TV is on the correct input.

Turn TV off, then on to determine input.

Video when using composite, or component.

DVI when using DVI, and HDMI when using HDMI.

Do ghosting appear

when watching multiple discs?

YES

One disc displaying the issue is a problem with the disc.

Multiple discs displaying the problem could indicate the BD lens needs to

be cleaned. Recommend the customer use a lens cleaner on the BD.

A lens cleaner is available at any local electronics retailer.

Do lines appear

when watching multiple discs?

YES

One disc displaying the issue is a problem with the disc.

Multiple discs displaying the problem could indicate the BD lens needs to

be cleaned. Recommend the customer use a lens cleaner on the BD.

A lens cleaner is available at any local electronics retailer.

Does ghosting appear

when the BD is connected to

another TV?

YES

Connect the BD to another TV and play a disc.

No ghosting during disc play back indicates a problem with the first TV.

Please refer to the owners manual for instructions on how to connect

the BD to a TV. If the BD has a problem on the second TV,

then see service chart for service information.

Has the customer tried

another set of cables?

Have the customer try another set of cables. A bad cable can

also cause video problems. Test the cable with another device to

the TV to also determine if the TV is bad. If BD is problem,

please see service chart for service information.

Summary of Contents for BP330




















































































Search results

Summary of Contents for BP330

Reviews:

Related manuals for BP330

Brands by name

Popular brands

LG BP330, Service Manual

Search results

Summary of Contents for BP330

Reviews:

Related manuals for BP330

Brands by name

Popular brands