LG BP330 Service Manual Download

Page: 24 / 83

3-11

DIGITAL DISPLAY & MEDIA TRAINING MASTER

Is the display

HDCP compliant?

YES

Make sure the display is HDCP compliant when using a DVI or

HDMI connection. A lack of HDCP compliancy on the display may

cause an invalid format or format not supported message to appear.

It can also cause a copy protection OSD to appear.

Has the customer tried the

device on another display?

YES

Ask the customer to connect the device to another display.

If the device starts working, then the problem may be the original display.

The customer will need to troubleshoot the display. If the device

still does not work, then the problem may be the device or the cable.

Has the customer tried

another cable?

Ask the customer to replace the cable between the device and display.

If the problem is corrected, then the problem was with the cable.

If the problem continues, then the device is the problem.

Set up service according to in warranty or out of warranty procedures.

2-5. Invalid Format or Format Not Supported

Summary of Contents for BP330




















































































Search results

Summary of Contents for BP330

Reviews:

Related manuals for BP330

Brands by name

Popular brands

LG BP330, Service Manual

Search results

Summary of Contents for BP330

Reviews:

Related manuals for BP330

Brands by name

Popular brands