36
Operation
Operation
4
Using the Sleep Timer
You can set the unit to turn off automatically at
a specified time.
Press SLEEP repeatedly.
The indicator changes cyclically in the display
window as follows.
SLEEP 180
t
150
t
120
t
90
t
80
t
70
t
60
t
50
t
40
t
30
t
20
t
10
t
Off (No display)
To check the remaining time, press SLEEP. The
remaining time appears in the display window.
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then
press SLEEP once again while “SLEEP 10” is
displayed.
NOTE
When the sleep timer is activated, the display
window dims.
Using microphone
1.
Connect a microphone (
6.3 mm) to MIC
jack.
Microphone connection
O
N
Unit
Microphone
“
“ is displayed in the display window.
2.
Play the music you want.
3.
Sing along with the accompaniment.
4.
Adjust the microphone volume by pressing
MIC VOL (-/+).
5.
Adjust the echo volume by pressing ECHO
VOL (-/+).
NOTE
• When not using the microphone, set the
microphone volume to minimum or turn off the
microphone and remove the microphone from
the MIC jack.
• If the microphone is set too near the speaker, a
howling sound may be produced. In this case,
move the microphone away from the speaker
or decrease the sound level by using the MIC
VOL(+/-) button.
• The microphone function is not operated in
the digital (COAXIAL 1 , COAXIAL 2, OPTICAL 1,
OPTICAL 2 or HDMI IN) mode.
Summary of Contents for ARX8000
Page 43: ...43 Appendix Appendix 7 ...
Page 44: ......
