Installation Manual
9
ENGLISH
Installation
Indoor unit
1. There should not be any heat or steam near
the unit.
2. Select a place where there are no obstacles
around of the unit.
3. Make sure that condensation drainage can
be conveniently routed away.
4. Do not install near a doorway.
5. Ensure that the interval between a wall and
the left (or right) of the unit is more than
100mm. The unit should be installed as high
as possible on the wall, allowing a minimum
of 200mm from ceiling.
6. Use a metal detector to locate studs to
prevent unnecessary damage to the wall.
Outdoor unit
1. If an awning is built over the unit to prevent
direct sunlight or rain exposure, make sure
that heat radiation from the condenser is not
restricted.
2. Ensure that the space around the back and
sides is more than 300mm. The space in
front of the unit should be more than 700mm
of space.
3. Do not place animals and plants in the path
of the warm air.
4. Take the weight of the air conditioner into
account and select a place where noise and
vibration are minimum.
5. Select a place where the warm air and noise
from the air conditioner do not disturb
neighbors.
Select the best Location
More than 200
More than
100
More than 2300
More than
100
(
Unit : mm
)
Install the indoor unit on the wall where the height from the floor is more than 2300mm.
More than
300
More than
300
Sunroof
Fence or
obstacles
More than
700
More than
600
(
Unit : mm
)
Summary of Contents for AMNW12GRBL0
Page 28: ......
