5. Trouble Shooting
- 158 -
Copyright © 2016 - 2020 LG Electronics Inc.
All rights reserved. Only training and service purposes.
[Connector with capacitor in CN_Flash_Writer or CN_Flash]
■
Applied Model : Multi/Single Outdoor PCBA
(Refer to PCB P/no of attached file)
■
Applied S/No : ~ 301xxxxxx (~ Jan, 2013)
1. Symptom
-. Outdoor unit cannot communicate with Indoor unit.
-. Outdoor reset then work normal.
: It happens intermittently
-. LEDs for showing power-on and communication status are not on or not
blinking in outdoor inverter PCBA
2. Causes
-. Noise disturb the outdoor unit communication with indoor unit
3. Improvement
-. Inserting small connector with capacitor in Inverter PCBA of Outdoor Unit
1)Connector can be applied to the list(PCBA P/No) on the next page
2)Guide where you put it on the next page
-. It helps outdoor unit communicate with indoor unit better than before and reduce the noise level
How to measure for Environment Noise
Connector with capacitor in CN_FLASH and CMN_CNVSS
6.7 Troubleshooting Outdoor Error
CH 05/53 (Indoor/Outdoor Device Communication Error)
→
Detection by indoor devices
