8 | ProduCT dATA
Art Cool Premier W
all Mounted Engineering Manual
Due to our policy of continuous product innovation, some specifications may change without notification.
Single Zone art Cool
Premier Wall Mount
Single Zone Art Cool Premier Wall Mount
units are equipped with inverter components
that offer superior load matching and long
piping installation. The product works for
optimizing power consumption in residential
and small office buildings. Utilizing multiple
indoor wall mount units each with custom
temperature controls allow for precise
temperature settings in each zone of the
building. Art Cool Premier allows flexibility in
interior design and complements any decor.
low Sound levels
When outdoor units operate fully loaded, they
have one of the quietest sound levels. To
promote a quiet, comfortable environment, the
LG Single Zone Art Cool Premier indoor units
operate at sound levels as low as 25 dB(A)
(17dB(A) in sleep mode) and the outdoor
units as low as 45 dB(A) at full load.
All rotating components are soft-started by
the controller using digitally controlled invert-
ers, which reduce undesirable noise caused
by fans and compressors cycling on and off.
Comfort Control at its
best
Unlike traditional air conditioning control
systems, which use thermostatic controls
to maintain room temperatures, LG Single
Zone Inverter controls continuously vary the
indoor unit fan speed and refrigerant flow, in-
directly providing lower and more consistent
humidity levels in the conditioned space.
LG Single Zone one-to-one systems con-
tinuously measure the room temperatures
and adjust system operation accordingly to
maintain set temperature. The outdoor unit
adjusts operation by varying the compressor
speed and outdoor fan motors as needed
to maintain system operating pressure. As
a result, the Single Zone Art Cool Premier
Wall Mount system delivers targeted space
temperature control.
inverter driven
The twin-rotary compressor is optimized to
maximize compressor efficiency, which re-
duces power consumption and monthly utility
bills. This latest inverter technology allows
the LG Single Zone Art Cool Premier Wall
Mount outdoor unit to vary the compressor
motor shaft speed to deliver an appropriate
amount of cooling to the indoor unit. Precise
refrigerant volume delivery translates into
long periods with coil surface temperatures
below dew point and minimizes compressor
and fan component run time which may lead
to lower utility usage.
Simplified installation
Cooling and heating systems that use the
LG Single Zone Art Cool Premier Wall Mount
product simplify and reduce the mechani-
cal and control system design time. The
designer no longer has to be concerned
with interconnecting chilled and condenser
water piping, air-distribution duct systems,
matching and selecting chillers, towers,
pumps, coils, fans, air handlers, or Variable
Air Volume (VAV) boxes.
operating range
The Single Zone Art Cool Premier Wall
Mount product has a nominal capacity range
of 3/4 to 1 ton (depending on outdoor/indoor
units)
.
operating ranges include:
Art cool Premier outdoor Units
Cooling: 14°F DB to 118°F DB
Heating: -13°F WB to 65°F WB
Compact Size
Single Zone Art Cool Premier Wall Mount
units are available in 3/4 to 1 tons. The out-
door units have a footprint of (WxHxD)
30 5/16 x 21 1/2 x 11 5/16.
heat transfer Efficiency
Fin design with GoldFin™ coating
All Single Zone Art Cool Premier Wall Mount
outdoor units are provided with large surface
coils made of copper tubes with louvered
aluminum fins designed to maximize unit
operating efficiency over a wide range of
ambient conditions.
Standard from the factory, every LG Single
Zone Art Cool Premier Wall Mount outdoor
coil fin surface is coated with LG’s exclusive
GoldFin™ anti-corrosive coating designed
to prevent natural surface corrosion of the
aluminum fins. This maintains heat transfer
properties of the coil for an extended time.
A hydrophilic coating is applied to the
outdoor unit coil fin surface over the GoldFin
coating. This coating enhances the develop-
ment of heavier water droplets gathering on
the fin surface. As a result, the droplets roll
off the fin surfaces, delaying the point when
frost forms on the coil surface during heat-
ing operation. This coating also makes it
possible to easily clean the outdoor unit coil
using a mild soap.
other Features
•
Inverter Variable Speed Compressor
•
Jet Cool/Jet Heat
•
Dehumidifying Mode
•
Chaos Wind
•
Auto restart
•
Auto operation
•
Self-cleaning indoor coil
•
Smaller Footprint
•
Precision Load Matching
•
Follows AHRI 210/240
ProduCt FEaturES and bEnEFitS
