24
INSTALLATION OF UNIT
ENGLISH
Ground Cable
Main Power
Terminal Block
Insulation sleeves
attachments
Fix firmly not to
be displaced
Ground Cable
Ground Cable
Fix firmly not to be displaced
Fix firmly not to be displaced
Main Power
Terminal Block
Main Power
Terminal Block
Insulation
sleeves
attachments
Insulation
sleeves
attachments
• To select Circuit Breaker correctly, refer to Electric Characteristics in the Product Data Book.
CAUTION
!
Connect the cable to the Product
1
Remove the cover control from the unit by loosening the screw.
Connect the wires to the terminals on the control board individually as the following.
2
Secure the cable onto the control board with the holder (clamper).
3
Refix the cover control to the original position with the screw.
4
Use a recognized circuit breaker between the power source and the unit. A disconnection
device to adequately disconnect all supply lines must be fitted.
The power source must be supplied to each
Control Box (A:Master, B:Slave) individually.
10/12.5/15 RT - 220 V 3~
15RT - 460 V 3~
20/23/25 RT - 220 V 3~
Fix firmly not to be displaced
Main Power
Terminal Block
Insulation
sleeves
attachments
Ground Cable
20/25 RT - 460 V 3~
The power source must be supplied to the
Master Control Box (A:Master) only.
1,MFL67445803,영영 2018. 2. 19. 영영 5:00 Page 24
