background image

• Be sure the installation area does not deteriorate with age.

- If the base collapses, the air conditioner could fall with it, causing property damage, product failure,

and personal injury.

Operation

• Do not let the air conditioner run for a long time when the humidity is very high and a door or a win-

dow is left open.
- Moisture may condense and wet or damage furniture.

• Take care to ensure that power cable could not be pulled out or damaged during operation.

- There is risk of fire or electric shock.

• Do not place anything on the power cable.

- There is risk of fire or electric shock.

• Do not plug or unplug the power supply plug during operation.

- There is risk of fire or electric shock.

• Do not touch(operate) the product with wet hands.

- There is risk of fire or electrical shock.

• Do not place a heater or other appliances near the power cable. 

- There is risk of fire and electric shock.

• Do not allow water to run into electric parts.

- It may cause failure of the product or electric shock.

• Do not store or use flammable gas or combustibles near the product.

- There is risk of fire or failure of product.

• Do not use the product in a tightly closed space for a long time.

- Oxygen deficiency could occur.

• When flammable gas leaks, turn off the gas and open a window for ventilation before turn the prod-

uct on.
- Do not use the telephone or turn switches on or off. There is risk of explosion or fire

• If strange sounds, or small or smoke comes from product. Turn the breaker off or disconnect the

power supply cable.
- There is risk of electric shock or fire.

• Stop operation and close the window in storm or hurricane. If possible, remove the product from the

window before the hurricane arrives.
- There is risk of property damage, failure of product, or electric shock.

• Do not open the panel of the product during operation. (Do not touch the electrostatic filter, if the

unit is so equipped.)
- There is risk of physical injury, electric shock, or product failure.

• When the product is soaked (flooded or submerged), contact an Authorized Service Center.

- There is risk of fire or electric shock.

• Be cautious that water could not enter the product.

- There is risk of fire, electric shock, or product damage.

• Ventilate the product from time to time when operating it together with a stove, etc.

- There is risk of fire or electric shock.

• Turn the main power off when cleaning or maintaining the product.

- There is risk of electric shock.

• When the product is not be used for a long time, disconnect the power supply plug or turn off the

breaker.
- There is risk of product damage or failure, or unintended operation.

ENGLISH

SAFETY PRECAUTIONS

4

Summary of Contents for AK-Q120BC00






























Reviews: