CARE AND MAINTENANCE
ENGLISH
27
When the air conditioner is not going to be used for a long time.
When air conditioner is not going to be used for a long time.
1
Operate the air conditioner on air circulation mode for 2 to 3 hours.
- This will dry out the internal parts.
2
Turn off the circuit breaker.
When the air conditioner is to be used again.
1
Clean the air filter and re-install it in the indoor side.
On the filter access panel at the left side of the unit, a “Filter access panel” label is attached.
2
Check that the air inlet and outlet of the indoor/outdoor unit are not blocked.
Operation Tips
• Do not overcool the room.
- This is not good for your health and wastes electricity.
• Keep blinds or curtains closed.
- Do not let direct sunshine enter the room when the air conditioner is in operation.
• Clean the air filter regularly.
- Blockages in the air filter reduce the airflow and lower cooling and dehumidifying effects.
• Make sure that the doors and windows are shut tight.
- Avoid opening doors and windows as much as possible to keep the cool air in the room.
• Ventilate the room occasionally.
- Since windows are kept closed, it is a good idea to open them and ventilate the room now
and then.
• Turn off the circuit breaker when the air conditioner is not going to be used for a long time.
Dirt may collect and may cause a fire.
CAUTION
!
• Before removing access panels to draw out air filters, disconnect power supply.
• Since the fan rotates at high speed, it may cause a serious injury
①
Clean at least once every month using a vacuum cleaner or washing with a neutral deter-
gent in lukewarm water.
②
After washing with water, dry it well in the shade.
- Do not expose the air filter to direct sunlight or heat from a fire when drying it.
CAUTION
!
Summary of Contents for AK-Q120BC00
Page 29: ......
