background image

28

BEFORE YOU CALL FOR SERVICE...

ENGLISH

BEFORE YOU CALL FOR SERVICE...

Check the following points before requesting repairs or service.... If the fault persists, please con-
tact your dealer or service center.

Case

Explanation

Does not operate.

• Have you made a mistake in timer operation?

- See reservation instructions.

• Has the fuse blown or has the circuit breaker been tripped?

• Does the remote controller display "      " on the LCD?

This means that protective device has been tripped please
contact your dealer or service center.

The room has a peculiar odor. 

• Check that this is not a damp smell exuded by the walls, car-

pet, furniture, or cloth items in the room.

It seems that condensation is
leaking from the air conditioner.

• Condensation occurs when the airflow from the air condition-

er cools the warm air.

Air conditioner does not operate
for about 3 minutes when
restarted.

• This is the protection device of the air conditioner.

• Wait about three minutes and operation will begin.

Does not cool or heat effective-
ly.

• Is the air filter dirty?

- See air filter cleaning instructions.

• The room may have been very hot when the air conditioner

was first turned on. Allow time for it to cool down.

• Has the setting temperature been set incorrectly?

- See temperature setting instructions.

• Has the setting temperature been set incorrectly?

• Are the unit's air inlet or outlet vents obstructed?

Remote controller display is
faint, or no display at all.

• Has the circuit breaker been tripped?

Summary of Contents for AK-Q120BC00






























Reviews: