REAR-PANEL CONNECTIONS
- 10 -
Play (CDP)-Deck Analog Output :
These
jacks carry the analog audio output signal from
the
Play Deck
. Connect them to the CD input
jacks on a receiver, preamp or processor.
Record (CDR)-Deck Analog Output :
These jacks carry the output signal from the
Record Deck
. Connect them to the
Tape
Play/In
input jacks on a receiver, preamp or
processor.
Record (CDR)-Deck Analog Input :
These jacks accept the analog signals that are
used for CD recordings. Connect them to the
Tape Rec/Play outputs on a receiver, preamp
or processor.
Play(CDP)-Deck Coaxial-Digital Output :
This jack carries the digital-audio output signal
from the
Play Deck
. Also, if it is the single
mode, it will output from the
Record Deck.
Connect it to a coaxial-digital input on a
receiver, processor or digital decoder.
Record(CDR)-Deck Coaxial-Digital
Output :
This jack carries the digital audio
output signal from the
Record Deck
. Connect
it to a coaxial digital input on a receiver,
processor or digital decoder. Also, if it is the
single mode, it will output from the
Play Deck.
Record (CDR)-Deck Coaxial-Digital
Input :
This jack accepts the digital-audio input
signal from a compatible digital audio product
and should be connected directly to a digital
player or to a coaxial-digital output on a CD or
DVD player or an A/V receiver or processor.
IMPORTANT NOTE :
The coaxial digital inputs
should only be connected to
digital
input or
output jacks. Even though they use the same
RCA type connector as standard analog audio
connections, DO NOT connect them to
conventional analog input or output jacks.
Record (CDR)-Deck Optical-Digital
Input :
This jack accepts the digital-audio input
signal from a compatible digital audio product,
and should be connected directly to the optical-
digital output on a CD or DVD player or an A/V
receiver or processor.
Record (CDR)-Deck Optical-Digital
Output :
This jack carries the digital audio
output signal from the
Record Deck
. Connect
it to an optical digital input on a receiver,
processor or digital decoder. If it is the single
mode, it will output also from the
Play Deck.
AC Power Cord :
Connect this plug to an
AC outlet. If the outlet is switch controlled,
make certain that it is in the
ON
position
Play (CDP)-Deck Analog Output
Record (CDR)-Deck Analog Output
Record (CDR)-Deck Analog Input
Play (CDR)-Deck Coaxial-Digital Output
Record (CDR)-Deck Coaxial-Digital Output
Record (CDR)-Deck Coaxial-Digital Input
Record (CDR)-Deck Optical-Digital Input
Record (CDR)-Deck Optical-Digital Output
AC Power Cord
1
1
5
8
2
3
4
2
3
4
5
9
6
7
8
9
ANALOG
COAXIAL
CDR
R
OUT
OUT
OUT
IN
L
1
2
4
6
3
7
8
5
CDP
OUT
CDR
OUT
IN
IN
6
7
9
Summary of Contents for ADR-620
Page 28: ...P NO 3828R D007L ...