LG ACHH017HBAB Installation And Owner'S Manual Download Page 77

Page: 77 / 134

Control

Due to our policy of continuous product innovation, some specifications may change without notification.

HMI SCREENS

Select Setting 2 on the Setup_Installer Mode screen, and the following screen will appear.

Press the condensation temperature (spray) or the OA temperature (spray) icon to display the
following screen.
- Range of condensation temperature settings: 40 to 60 °C
- Range of OA temperature settings: 20 to 60 °C

Icon

Description

This function is used for on-site inspection only for models with a legal freezing

capacity of 20RT or higher.

This function is used for on-site inspection only for models with a legal freezing

capacity of 20RT or higher.

Set the condensation temperature at which the spray function works.

Set the outdoor temperature at which the spray function works.

Summary of Contents for ACHH017HBAB







































































































































Search results

Summary of Contents for ACHH017HBAB

Reviews:

Related manuals for ACHH017HBAB

Brands by name

Popular brands

LG ACHH017HBAB, Installation And Owner'S Manual

Search results

Summary of Contents for ACHH017HBAB

Reviews:

Related manuals for ACHH017HBAB

Brands by name

Popular brands