• In group control, basic operation settings, weak / medium / strong airflow strength, lock
settings of wired controller, time settings and other functions may be restricted
1
Pressing the
key and
key
simultaneously for more than 3 seconds can
enter the manual setting mode of the system.
- Select the master / slave setting code of the
wired controller by pressing the mode button
after entering the manual setting mode.
* Codes for wire controller master / slave
setting: 07
2
Select the desired setting value with the
temperature key.
3
Press the
button to save the setting value.
4
After the setting is completed, pressing the
key and
key simultaneously for more
than 3 seconds can exit the manual setting
mode of the system.
- If there is no key input within 25 seconds, the
system will exit the manual setting mode
automatically.
Code
value
Value
*Setting value
00: Slave
01: Master
Wired controller
Function
Master
In group control, the indoor unit runs based on the master wired controller.
(factory settings is “Master")
Slave
The group control is set to ‘master’, and the others are set to ‘slave’
* Please refer to the group control section for details
Installer Setting - W
ired
C
ontroller
M
aster /
S
lave
S
etting
This function is used for group control or setting when
two
wired controllers are used.
20
INSTALLATION INSTRUCTION
ENGLISH
