background image

6

Room Air Conditioner

Electrical Safety

Electrical Safety

• This appliance must be properly grounded.

To minimize the risk of electric shock, you must alway plug into a grounded oulet.

• Do not cut or remove the grounding prong from the power plug.  
• Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance

unless the cover screw is metal and not insulated, and the wall receptacle is grounded through the
house wiring.

• If you have any doubt whether the air conditioner is properly grounded, have the wall receptacle and

circuit checked by a qualified electrician.

We strongly discourage the use of an adapter due to potential safety hazards. For temporary connections,
use only a genuine adapter, available from most local hardware stores. Ensure that the large slot in the
adapter is aligned with the large slot in the receptacle for a proper polarity connection.
To disconnect the power cord from the adapter, use one hand on each to avoid damaging the ground
terminal. Avoid frequently unplugging the power cord as this can lead to eventual ground terminal damage.

• Never use the appliance with a broken adapter.  

We strongly discourage the use of an extension cord due to potential safety hazards. 

Temporary Use of an Adapter

Temporary Use of an Extension Cord

This symbol alerts you to the risk of electric shock. 

This symbol alerts you to hazards that may cause harm to the
air conditioner.

This symbol indicates special notes.

NOTE

Symbols used in this Manual

This appliance should be installed in accordance with national wiring regulations. This guide acts as a
guide to help to explain product features.

Summary of Contents for A07LHD






















Reviews: