background image

8

Room Air Conditioner

Product Introduction

Art Cool Deluxe(Type 1)

Display panel LED indicators 

Signal receiver

Front panel

Air discharge

Power cord

ON/OFF button

Plasma filter

Air inlet

Air filter

Air intake vents

Air outlet vents

Connecting
wires

Refrigerant pipes

Drain hose

Base plate

On/Off

: Lights up during the system operation, error code and auto restart setting. 

Sleep mode

Energy-Saving
Cooling Mode

: Lights up during sleep mode auto operation.(non-Inverter Model)

: Lights up during Energy-Saving Cooling Mode Operation(Inverter Model only)

Plasma

Plasma and Ion

: The function illustrates its dynamic mode by using a multiple lighting system.

Timer

: Lights up during timer operation.(non-Inverter Model)
  Lights up during timer operation or  sleep mode auto operation (Inverter Model only)

Defrost mode

Power Display : Indicates the setting temperature and operation mode.

*SUB DISPLAY (OPTIONAL)
 

(Blue: Plasma, Green: Auto clean, Orange: Ion)

: Lights up during defrost mode or 

*hot start operation 

(Heat pump model only)

: Lights up during outdoor unit operation. (Cooling model only)

Outdoor unit
operation

OUT

DOOR

Hot start operation

: Stops the indoor fan in heating operation for minutes to prevent cold air from blowing out 

from unit. 

* In defrost mode unit stops heating operation for few minutes to remove formation of ice on the heat 
  exchanger coils to maintain the efficiency.

Operation

mode

Shape of

display

Setting

temperature

Standard

Too hot

Hot

Cold

Too cold

Jet

Cool/Heat

Test 

operation

Auto

clean

Comfortable

Auto operation mode

Cooling, heating,

Dehumidification 

Mode

Art Cool Deluxe(Type 2)

Display panel LCD indicators 

Signal receiver

Front panel

Air discharge

ON/OFF button

Power cord

Plasma filter

Air inlet

Air filter

Blue

Green Orange

Energy-saving 

cooling mode

Outdoor Unit

Operation Indication Lamps

Summary of Contents for A07LHD






















Reviews: