42
WIRING
ENGLISH
5feet
(1.5meters)
Fig.1 Typical locations for remote controller
3 Remove the installation paper before
installing the remote controller so that it
can fit into the right place.
Fixing the
remote controller
Fixing the
connecting cable
Yellow
Supply the power after connecting deluxe wired remote controller.
When you need to change wired remote controller, turn off the main power and change it
before turn on the main power.
Location of remote controller
- Since the room temperature sensor is in the remote controller, the remote controller box should
be installed in a place away from direct sunlight, high humidity and direct supply of cold air to
maintain proper space temperature. Install the remote controller about 5ft(1.5m) above the floor
in an area with good air circulation at an average temperature.
Do not install the remote controller where it can be affected by:
- Drafts, or dead spots behind doors and in corners.
- Hot or cold air from ducts.
- Radiant heat from sun or appliances.
- Concealed pipes and chimneys.
- Uncontrolled areas such as an outside wall behind the remote controller.
- This remote controller is equipped with a seven segment LED. display. For proper display of the
remote controller LED's, the remote controller should be installed properly as shown in Fig.1.
(The standard height is 1.2~1.5 m from floor level.)
Summary of Contents for 62AWYU7L6
Page 57: ......
