LG 55EJ5E Owner'S Manual Download Page 60

Page: 60 / 117

ENGLISH

OPS Control

•

OPS Power Control

: This feature enables you to control the power of the OPS as you turn on/off the display.

Disable

: Disable

OPS Power Control

Sync (On)

: Synchronize the monitor's power status only when the monitor is on.

Sync (On/Off)

: Synchronize the monitor's power status with the OPS.

•

Control Interface Selection

: This feature enables you to configure communication with the OPS connected to your

monitor.

Display

: Enable communication with external serial ports.

OPS

: Enable communication with the OPS connected to your monitor.

Background Image

This feature enables you to set the default background image.

•

Booting Logo Image

: Change the logo image that appears when the device boots up. If you set this option to Off,

no logo image appears when the device boots up. Download or initialize an image file on the

storage device.

•

No Signal Image

: Changes the image that appears when there is no signal. If you set this option to Off, no image

appears when there is no signal. Download or initialize an image file on the storage device.

Input Manager

Specify a label for each input source.

Summary of Contents for 55EJ5E






















































































































Search results

Summary of Contents for 55EJ5E

Reviews:

Related manuals for 55EJ5E

Brands by name

Popular brands

LG 55EJ5E, Owner'S Manual

Search results

Summary of Contents for 55EJ5E

Reviews:

Related manuals for 55EJ5E

Brands by name

Popular brands