LG 49VL5F Owner'S Manual Download Page 64

Page: 64 / 122

ENGLISH

NOTE

•

Software-related content may be changed without prior notice due to upgrades of the product functions.

•

Some features described in the User Manual may not be supported in certain models and countries.

•

SNMP 2.0 is supported.

SETTINGS

Home

Global Buttons

•

[Position]: You can set the location of the rotated OSD as Top/Center/Bottom.

•

[Input]: Navigate to the external input selection screen.

•

[Settings]: Navigate to the Settings screen.

NOTE

•

When the OSD rotation is set to 90/270, [Position] appears.

Dashboard

•

This feature displays key information about your Signage monitor in the center of the home screen. In the Dashboard,

you can manually change settings by selecting the corresponding items.

NOTE

•

If the dashboard is locked, the focus does not move.

[Content Manager]

•

[Player]: Play a variety of content including images, videos, music and SuperSign content.

•

[Scheduler]: Manage schedules for content that will be played at different times.

•

[Playlist]: Create a playlist with photos and videos.

Summary of Contents for 49VL5F



























































































































Search results

Summary of Contents for 49VL5F

Reviews:

Related manuals for 49VL5F

Brands by name

Popular brands

LG 49VL5F, Owner'S Manual

Search results

Summary of Contents for 49VL5F

Reviews:

Related manuals for 49VL5F

Brands by name

Popular brands