LG 42PX4D Owner'S Manual Download

Page: 90 / 108

90 Plasma TV

Operation

- Nothing to do with Caption on/Off using

Mute

button, the mode selected Caption/Text is to be displayed.

- When you repeatedly press the

Mute

button, the sound mode is changed in turn. (Refer to the picture below)

Note:

• EZ Mute does not operate in Component/RGB/HDMI/DVI modes.

Mute

EZ Mute

Mute

: Sound is muted.

EZ Mute

: a special mute mode to

activate the closed caption, auto-
matically.

EZ Mute

Mute Off

: Sound is enabled.

1. Press the

FREEZE

button in 720p or 1080i mode.

2. Use the

buttons to select the screen section to be magnified.

3. To return to normal viewing, press the

FREEZE

button again.

Note

: The Magnify feature is available only in 720p or 1080i mode, but the

FREEZE button works in all video formats.

- Enlarges the picture with correct proportions.
- When enlarging the picture, the image may become distorted.

Freeze & Magnify (DTV/CADTV 720p, or 1080i mode only)

Summary of Contents for 42PX4D













































































































Search results

Summary of Contents for 42PX4D

Reviews:

Related manuals for 42PX4D

Brands by name

Popular brands

LG 42PX4D, Owner'S Manual

Search results

Summary of Contents for 42PX4D

Reviews:

Related manuals for 42PX4D

Brands by name

Popular brands