background image

Owner’s Manual   39

Operation

DTV Link

DTV Link

: DTV Link applies to 1394 connection of device labeled DTV Link logo.

W

W

V

How to play the DTV Link

<DTV Link-Producer>

1. Connect the IEEE 1394 jack of the TV to the IEEE 1394

jack of the DTV Link supported device IEEE 1394 Cable.

* What’s the 

DTV Link

?

It is normal standard of CEA which restricts

by a remote and displays OSD and plays to

stream of a remote control by using a con-

nection of IEEE1394.

<Connect the IEEE1394 Cable>

2. When watching the TV,  press the            .

1394

<TV>

3. Press the 

TV INPUT

button to stop the IEEE1394

function.

Notes:

• On a condition of connecting the IEEE 1394, you can control the DTV Link device while watching the OSD through DTV and

DTV remote control.

( ex: change of channel, play, record, a show of recording list etc.)

• Analog channel is not supported.

• In case a device outputting MPEG2 TS Data through IEEE1394 port but it doesn't support to DTVLink, you are able to

see a screen even if it doesn't control directly on TV.

Summary of Contents for 42PX4D













































































































Reviews: