LG 42PC1DA Series, Owner'S Manual

Page: 119 / 133

APPENDIX
115
2211.. G Grreeeenn aaddjjuussttm meenntt((CCoom mm maanndd::ww))
To adjust green in color temperature.
Transmission
[k][w][ ][Set ID][ ][Data][Cr]
Data Min:0
~
Max:C8
*Refer to "Real data mapping 2" as shown below.
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
2222.. BBlluuee aaddjjuussttm meenntt((CCoom mm maanndd::$$))
To adjust blue in color temperature.
Transmission
[k][$][ ][Set ID][ ][Data][Cr]
Data Min:0
~
Max:C8
*Refer to "Real data mapping 2" as shown below.
Acknowledgement
[$][ ][Set ID][ ][OK/NG][Data][x]
*Real data mapping 2
0 : -20
5 : -19
A : -18
5F: -1
64: 0
69: +1
C3 : +19
C8 : +20
2233.. PPIIPP IInnppuutt SSeelleecctt ((CCoom mm maanndd22::yy))
To select input source for sub picture in PIP/Twin picture
mode.
Transmission
[k][y][ ][Set ID][ ][Data][Cr]
Data 0: DTV 1: Analog
2: AV1 3: AV2
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
2244.. IISSM M M Meetthhoodd ((CCoom mm maanndd22::pp))
To avoid having a fixed image remain on screen.
Transmission
[ j ][p][ ][Set ID][ ][Data][Cr]
Data 1: Inversion 2: Orbiter
4: White Wash 8: Normal
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
2255.. LLooww PPoowweerr ((CCoom mm maanndd22::qq))
To control the low power function on/off.
Transmission
[ j ][q][ ][Set ID][ ][Data][Cr]
Data 0: Low power off
1: Low power on
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
2266.. O Orrbbiitteerr TTiim mee SSeettttiinngg ((CCoom mm maanndd22::rr))
To adjust orbiter operation time term.
Transmission
[ j ][r][ ][Set ID][ ][Data][Cr]
Data Min: 1
~
Max: FE (*transmit by Hexadecimal code)
Unit: Second
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
2277.. O Orrbbiitteerr PPiixxeell SSeettttiinngg ((CCoom mm maanndd22::ss))
To adjust pixel number in orbiter function.
Transmission
[ j ][s][ ][Set ID][ ][Data][Cr]
Data Min: 1
~
Max: 3
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
2288.. CChhaannnneell TTuunniinngg ((CCoom mm maanndd:: m m aa))
To tune channel to following physical/major/minor number.
Transmission
[m][a][ ][Set ID][ ][Data0][ ][Data1]
[ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]
Data 0: Physical Channel Number(Transmit by Hexadecimal
code)
NTSC air:02
~
45
NTSC cable: 01, 0E
~
7D
ATSC air:01
~
45
ATSC cable:01
~
87
Data1,Data2: Major Channel Number (two part) /
Channel Number (One part)
Data1: High byte
Data2: Low byte
Two part channel number:
Major number-Minor number
One part channel number:
If the channel band is ATSC digital cable, it can be
used. In case of using one part channel number,
minor channel does not need.
Data3, Data 4: Minor Channel Number
Data3: High byte , Data4: Low byte
512D-2 06/2/18 8:51 AM Page 115