80
206-4235
Rescan
On
<
>
Close
1/1
Device name
Connection
LG-P930
Wi-Fi Direct pop-up window display
is the same whether the TV is or is
not in Pass-through Mode.
Wi-Fi Direct
Wi-Fi Direct connects a device without AP. Share
files using Wi-Fi Direct with SmartShare™.
▪ Wi-Fi Direct
Reference: Wi-Fi Screen Share Features (Cont.)
Application Launch Bar
Note:
The Application Launch bar is only available when pre-loaded
applications are enabled and when the Pro:Centric application is not
loaded on the TV. Each of the Wi-Fi Screen Share applications also
must be enabled in order for them to be available in the Application
Launch bar. If the Pro:Centric application is loaded on the TV, you must
access the Wi-Fi Screen Share options from the TV menus as described
on the previous page.
1. Press PORTAL on the remote to display the Application Launch bar.
All enabled applications will be displayed along the bottom of the
screen.
2. Use the Left/Right arrow keys on the remote to highlight the desired
application to launch, and then press
OK
to select it.
Depending on your selection in step 2, a Wi-Fi Direct, Smart Mirroring, or
WiDi pop-up window will be displayed.
Wi-Fi Direct
With the Wi-Fi Direct pop-up window on display, use the following
procedure to turn ON Wi-Fi Direct and select a device to which to make
a connection.
1. In the Wi-Fi Direct pop-up window, use the Left/Right arrow keys to
select
On
in the Wi-Fi Direct field. This will prompt the TV to search for
all available Wi-Fi Direct enabled wireless devices, including mobile
devices, laptops, etc. Devices found will be listed in the lower half of the
screen.
Note:
If the search does not initially locate any devices, select
Rescan
and press
OK
.
2. Use the Up/Down arrow keys to select/highlight the device with which
you wish to share, and then press
OK
.
3. A new pop-up window will prompt you to confirm your connection
request. Select
Yes
and press
OK
to continue.
The share request will be sent to the targeted device. The user of
that device may choose to allow or not allow the share connection.
Similarly, once Wi-Fi Direct is turned ON, other devices may request
share connections with this TV (pop-up share requests typically appear
in the bottom right of the TV screen).
4. If the share request is accepted, media files may now be shared
between the device and the TV using Wi-Fi Direct. Select
Close
and
press
OK
to exit the Wi-Fi Direct window.
5. To access media files/folders on the TV, either press
MENU SETTINGS
and select the
SmartShare
or
Input
menu icon or press the
Input
key
on the Installer Remote to select the Smart Share device. Then, select
the desired media category to view files.
Refer to the TV’s interactive guide for further information.
