ANNEXE
103
Protocole de transmission / réception
T
Trraan
nssm
miissssiio
on
n
[Commande 1] : Première commande pour contrôler l’ap-
pareil.
(j, k, m ou x)
[Commande 2] : Seconde commande pour contrôler l’ap-
pareil.
[Réglage ID] : pour régler l’identification pour choisir
lenuméro désiré pour l’ordinateur au menu
réglage. Gamme de 1 à 00. En sélectionnant 0,
chaque appareil branché sur le téléviseur est
contrôlé. Régler comme indiqué (1 à 99) au
menu et une décimale hexagonale (0x0 à
0x63) au protocole de transmission/réception.
[Donnée] : Pour transmettre donnée de commande.
Transmet FF pour lire la position de la commande.
[Cr] : Retour de chariot
Code ASCII 0x0D
[ ] : Code ASCII, espace (0x20)
*Sur ce modèle, le téléviseur ne transmet pas l’état lorsque
l’appareil est en mode d’attente.
R
Reecco
on
nn
naaiissssaan
nccee O
OK
K
Le moniteur transmet ACK (reconnaissance) en fonction de
ce format au moment de recevoir des données normales. À
ce moment, si la donnée est en mode lecture, elle indique la
donnée de position actuelle. Si en mode écriture, elle
retourne la donnée de l’ordinateur.
*Sur ce modèle, le téléviseur ne transmet pas l’état lorsque
l’appareil est en mode d’attente.
*format de données
[Commande 2] : utilise en tant que commande.
[Set ID] : utilise les petits caractères; si Set ID est réglé à 10,
il transmettra ‘0’, ‘a’.
[Données] : utilise les petits caractères; si Données est réglé
à 0xab, il transmettra ‘a’, ‘b’.
[OK] : utilise les petits caractères
*Sur ce modèle, le téléviseur transmet l’écho, les retours char-
iot (CR) et les sauts de ligne (LF) avec l’accusé de réception.
L’accusé de réception de l’alimentation ressemble à l’exemple
ci-dessous.
Ex) ka 01 01(CR)(LF)a 01 OK01x(CR)(LF)
[[C
Co
om
mm
maannd
dee1
1]][[C
Co
om
mm
maannd
dee2
2]][[ ]][[SSeett IID
D]][[ ]][[D
Do
onnnnééee]][[C
Crr]]
[[C
Co
om
mm
maannd
dee2
2]][[ ]][[SSeett IID
D]][[ ]][[O
OK
K]][[D
Do
onnnnééee]][[xx]]
R
Reecco
on
nn
naaiissssaan
nccee eerrrreeu
urr
Le poste de télévision transmet des accusés de réception
basés sur ce format lors de la réception de données
erronées en raison d’erreurs de communication ou de fonc-
tions non compatibles.
Donnée1: Code illégal
Donnée2: Fonction non compatible
Donnée3: Veuillez patienter
*Sur ce modèle, le téléviseur ne transmet pas l’état lorsque
l’appareil est en mode d’attente.
*format de données
[Commande 2] : utilise en tant que commande.
[Set ID] : utilise les petits caractères; si Set ID est réglé à 10,
il transmettra ‘0’, ‘a’.
[Données] : utilise les petits caractères; si Données est réglé
à 0xab, il transmettra ‘a’, ‘b’.
[NG] : utilise les petits caractères.
*Sur ce modèle, le téléviseur transmet l’écho, les retours char-
iot (CR) et les sauts de ligne (LF) avec l’accusé de réception.
L’accusé de réception de l’alimentation ressemble à l’exemple
ci-dessous.
Ex) ka 01 01(CR)(LF)a 01 NG01x(CR)(LF)
[[C
Co
om
mm
maannd
dee1
1]][[C
Co
om
mm
maannd
dee2
2]][[ ]][[SSeett IID
D]][[ ]][[D
Do
onnnnééee]][[C
Crr]]