LG 37LB1D, Owner'S Manual, Page: 95 / 107

APPENDIX
93
1 18 8.. R Reed d A Ad djjuussttm meenntt ((C Co om mm maannd d 2 2 :: vv))
G
To adjust red in colour temperature.
Transmission
Data Min : 0 ~ Max : 50
* Refer to ‘Real data mapping 2’. See page 95.
[k][v][ ][Set ID][ ][Data][Cr]
Ack
[v][ ][Set ID][ ][OK][Data][x]
1 19 9.. G Grreeeenn A Ad djjuussttm meenntt ((C Co om mm maannd d 2 2 :: w w))
G
To adjust green in colour temperature.
Transmission
Data Min : 0
~
Max : 50
* Refer to ‘Real data mapping 2’. See page 95.
[k][w][ ][Set ID][ ][Data][Cr]
Ack
[w][ ][Set ID][ ][OK][Data][x]
2 20 0.. B Blluuee A Ad djjuussttm meenntt ((C Co om mm maannd d 2 2 :: $ $))
G
To adjust blue in colour temperature.
Transmission
Data Min : 0 ~ Max : 50
* Refer to ‘Real data mapping 2’. See page 95.
[k][$][ ][Set ID][ ][Data][Cr]
Ack
[$][ ][Set ID][ ][OK][Data][x]
2 21 1.. PPIIPP IInnp puutt SSeelleecctt ((C Co om mm maannd d 2 2 :: yy))
G
To select input source for sub picture in PIP/Twin pic-
ture mode. You can also adjust input source for sub
picture using
PIP INPUT button on remote control.
Transmission
Data 0 : DTV
1 : Analogue
2 : AV1
3 : AV2
4 : Component
6 : RGB-DTV
7 : RGB-PC
[k][y][ ][Set ID][ ][Data][Cr]
Ack
[y][ ][Set ID][ ][OK][Data][x]
2 22 2.. A Ab bnno orrm maall SSttaattee ((C Co om mm maannd d 2 2 :: zz))
G
To recognize an abnormal state.
Transmission
Data FF : Read
Data 0: Normal (Power on and signal exist)
1: No signal (Power on)
2: Turn the monitor off by remote control
3: Turn the monitor off by sleep time function
4: Turn the monitor off by RS-232C function
5: 5V down
6: AC down
8: Turn the monitor off by Off time function
9: Turn the monitor off by Auto sleep function
a: Turn the monitor off by AV board detect
* This function is “read only”.
[k][z][ ][Set ID][ ][FF][ ][Cr]
Ack
[z][ ][Set ID][ ][OK][Data][x]
2 23 3.. PPiiccttuurree SSiizzee SSeettttiinngg ffo orr D DW W M Mo od dee
((C Co om mm maannd d 1 1 :: jj,, C Co om mm maannd d 2 2 :: tt))
G
To select the PIP picture format.
You can also select the PIP picture format using the SIZE
on the remote control.
Transmission
Data Min: 0
~
Max: 20
* Refer to ‘Real data mapping 1’. See page 95.
[j][t][ ][Set ID][ ][Data][Cr]
Ack
[t][ ][Set ID][ ][OK/NG][Data][x]
2 24 4.. A Auutto o C Co onnffiigguurree
((C Co om mm maannd d 1 1 :: jj,, C Co om mm maannd d 2 2 :: uu))
G
To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
Data 1: To set
[j][u][ ][Set ID][ ][Data][Cr]
Ack
[u][ ][Set ID][ ][OK/NG][Data][x]
9U1004A_03 06/6/27 2:11 PM Page 93