LG 37LB1D, Owner'S Manual, Page: 93 / 107

APPENDIX
91
0 05 5.. V Vo olluum mee M Muuttee ((C Co om mm maannd d 2 2 :: ee))
G
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission
Data 0 : Volume mute off (Volume on)
1 : Volume mute on (Volume off)
[k][e][ ][Set ID][ ][Data][Cr]
Ack
[e][ ][Set ID][ ][OK][Data][x]
0 03 3.. A Assppeecctt R Raattiioo ((C Coom mm maanndd 2 2 :: cc)) ((M Maaiinn PPiiccttuurree SSiizzee))
G
To adjust the screen format. (Main picture format)
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in
the SCREEN menu.
Transmission
Data 1 : Normal screen (4:3)
2 : Wide screen (16:9)
3 : Horizon (Spectacle)
4 : Zoom
6 : Original
7 : 14:9
8 : Full
[k][c][ ][Set ID][ ][Data][Cr]
Ack
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
[c][ ][Set ID][ ][OK][Data][x]
0 04 4.. SSccrreeeenn M Muuttee ((C Co om mm maannd d 2 2 :: d d))
G
To select screen mute on/off.
Transmission
Data 0 : Screen mute off (Picture on)
1 : Screen mute on (Picture off)
[k][d][ ][Set ID][ ][Data][Cr]
Ack
[d][ ][Set ID][ ][OK][Data][x]
0 06 6.. V Vo olluum mee C Co onnttrro oll ((C Co om mm maannd d 2 2 :: ff))
G
To adjust volume.
You can also adjust volume with the VOLUME buttons on
remote control.
Transmission
Data Min : 0
~
Max : 64
* Refer to ‘Real data mapping 1’. See page 95.
[k][f][ ][Set ID][ ][Data][Cr]
Ack
[f][ ][Set ID][ ][OK][Data][x]
0 07 7.. C Co onnttrraasstt ((C Co om mm maannd d 2 2 :: gg))
G
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission
Data Min : 0
~
Max : 64
* Refer to ‘Real data mapping 1’. See page 95.
[k][g][ ][Set ID][ ][Data][Cr]
Ack
[g][ ][Set ID][ ][OK][Data][x]
0 08 8.. B Brriigghhttnneessss ((C Co om mm maannd d 2 2 :: hh))
G
To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission
Data Min : 0 ~ Max : 64
* Refer to ‘Real data mapping 1’. See page 95.
[k][h][ ][Set ID][ ][Data][Cr]
Ack
[h][ ][Set ID][ ][OK][Data][x]
0 02 2.. IInnp puutt SSeelleecctt ((C Co om mm maannd d 2 2 :: b b))
G
To select input source for the set.
You can also select an input source using the
INPUT
button on the set's remote control.
Transmission
Data 0 : DTV
1 : Analogue
2 : AV1
3 : AV2
4 : Component
6 : RGB-DTV
7 : RGB-PC
[k][b][ ][Set ID][ ][Data][Cr]
Ack
[b][ ][Set ID][ ][OK][Data][x]
0 01 1.. PPo ow weerr ((C Co om mm maannd d 2 2 :: aa))
G
To control Power On/Off of the set.
Transmission
Data 0 : Power Off 1 : Power On
[k][a][ ][Set ID][ ][Data][Cr]
Ack
[a][ ][Set ID][ ][OK][Data][x]
G
To show Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Ack
* In like manner, if other functions transmit ‘0xFF’ data
based on this format, Acknowledgement data feed back
presents status about each function.
[a][ ][Set ID][ ][OK][Data][x]
9U1004A_03 06/6/27 2:11 PM Page 91