LG 19LV23 Series Owner'S Manual Download Page 26

Page: 26 / 142

ENG

ENGLISH

REMOTE CONTROL

REMOTE CONTROL

The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching

and ends to the label inside the compartment, and close the battery cover. Be

sure to point the remote control to the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.

Do not mix old and new batteries, as this may damage the remote control.

CAUTION

(POWER)

Turns the TV on or off.

ENERGY SAVING

(See p.67)

Adjusts the brightness of the screen to reduce energy consumption .

AV MODE

(See p.44)

Selects an AV mode.

INPUT

(See p.44)

Changes the input source; Turns the TV on .

TV/RAD

Selects Radio, TV and DTV programme.

LIGHT

Illuminates the remote control buttons.

Number buttons

Enters numbers.

LIST

(See p.39)

Accesses the saved programme list.

Q.VIEW

Returns to the previously viewed programme.

Summary of Contents for 19LV23 Series















































































































































Search results

Summary of Contents for 19LV23 Series

Reviews:

Related manuals for 19LV23 Series

Brands by name

Popular brands

LG 19LV23 Series, Owner'S Manual

Search results

Summary of Contents for 19LV23 Series

Reviews:

Related manuals for 19LV23 Series

Brands by name

Popular brands