Aria 130c/130/300/600 DECT
Wireless Terminal (GDC-345H) User Guide
LG-Nortel systems
１６
Issue
2.3
2) Post Dial
-. ARIA-160/100/34e, ARIA 130
→
CO Line Access Code (9, 8+XX or 88+XX)
→
Phone number
→
Connection ;
(XX means CO line number)
-. ARIA-20W
→
CO Line Access Code (9, 8+X or 88+X)
→
Phone number
→
Connection ;
(X means CO line number)
-.
ARIA–300/600
→
CO Line Access Code (9,8+XX or 88+XXX)
→
Phone number
→
Connection ;
(XX means CO Group Number, XXX means CO line number)
You may dial telephone number after pressing button. When
pressing CO line access code (9, 8 + XX, or 88 + XX), CO line dial tone
is heard. Every time pressing each button, it is displayed on the LCD. If
you dial a number late, “
DIALING TOO LATE
” message is displayed on
the LCD. It is displayed up to 10 digits.
Note :
In case of ARIA-20W and ARIA 130/300/600 system, if handset was registered by
‘TYPE 3’
, it is displayed
12 digits per line on the LCD (This feature is available when MPB version of ARIA 130/300/600 is 1.0Ba
above and when MPB version of ARIA-20W is 3.0Aa above. Please refer to ‘6.2 Subscription’ for details.
z
Press
button. Connection tone is heard and
phone
( ) icon is displayed on the LCD.
z
Dial CO line access code.
-. ARIA-186/100/34e, ARIA 130 (9, 8 + XX, or 88 + XX)
-. ARIA-20W (9,8 + X, or 88 + X)
-. ARIA 300/600 (9,8 + XX, or 88 + XXX)
z
Dial the desired phone number.
3) Call Release
To release a call, press
button. The
phone(
) icon will be disappeared and the wireless
terminal will goes to an idle state.
4) Assign CO Line/CO Line Group
Available CO lines can be grouped and the accessible CO line groups can be assigned to a
station by Admin programming (For detail programming, refer to “CO LINE GROUPS” and “CO
LINE ACCESS” of “Digital Key Telephone System Programming Manual”). All available CO
lines are assigned to Group 01 by default.
Accessing a CO line is done in three ways as above; (9, 8+CO line group # or 88+CO line #)
And they are;
9 (CO line Access Code) : Connect an available CO line of the assigned CO line group to
the station. CO line selecting method is programmable by Admin programming.
8 + CO line group # : Connect an available CO line of the CO line group. The CO line
group should be assigned to the station before by Admin programming. CO line selecting
method is programmable by Admin programming.
88+CO line # : Connect the CO line directly. The CO line should be allowed to the station
before by Admin programming.
S T A
X X X
X X X X X X X X X X
0 0 :
0 0
*
1
2
3
4
5
6
7
8
9
0
#
