LG-Nortel Aria 130 User Manual Download

Page: 80 / 81

Aria 130c/130/300/600 DECT
Wireless Terminal (GDC-345H) User Guide

LG-Nortel systems

７６

Issue

2.3

Appendix. C The LCD Messages Related To a Call

The followings describe messages displayed on the LCD of an attendant station and the wireless
terminal in Talking Mode.

VOLUME

At the DKTU,

(1) NO RESPONSE CT

Description : After key system requests a call to the wireless terminal, if there is no

response from the wireless terminal, this message is displayed on the LCD of
DKTU.

A. Called station : Power-off
B. Called station : Out-of-svc area

(2) NO CHANNEL

Description : There is not enough system resource. If the message is displayed frequently

on the LCD of DKTU, the system should be installed more.

There is no available RF channel ; WTIB side

- The reason is brought by WTIB.
- All RF channels are fully used.

There is no available PCM Hi-way ; MPB side

- The reason is brought by MPB.

(3) INVALID

Description : When a station not subscribed is called. The reason is brought by MPB.

(4) NO RESPONSE : STA xxx

Description : After key system requests a call to DKTU, if there is no response from the

wireless terminal, this message is displayed on the LCD of DKTU.

When a called DKTU does not respond;
- The reason is brought by MPB.
- It is not applicable to attendant station.

STOP!

;

The attendant station is not applicable for this case. When time-out is occurred, the call is

released.

(5) RELEASED : STA xxx

Description : After key system requests a call to the wireless terminal, if there is no

response from the wireless terminal, this message is displayed on the LCD
of DKTU.

When a called WHTU does not respond;

- The reason is brought by WTIB.

(6) DESUB. Fail

Summary of Contents for Aria 130


















































































Search results

Summary of Contents for Aria 130

Reviews:

Related manuals for Aria 130

Brands by name

Popular brands

LG-Nortel Aria 130, User Manual

Search results

Summary of Contents for Aria 130

Reviews:

Related manuals for Aria 130

Brands by name

Popular brands