98
Appendix B
Emergency Code
7. Press navigation key down to select "Display Name" and enter name
if required (Optional).
8. Press navigation key down to select "Password" and enter password
(see note 3).
9. Press navigation key down to select "SIP Domain" and enter Call
Server (iPECS) IP Address or domain.
10. Press navigation key down to select "Proxy IP" and enter Call Server
(iPECS) IP Address again.
11.Please do not change "Proxy Port" setting of 5060.
12.Press
Save
.
13.Press navigation key down to select "Provisioning Setting", enter the
code "0000" and press .
•
The code "0000" could be changed by the user.
14.Enter Call Server (iPECS) IP Address or domain and then press
to
save. (Use
to exit or return to standby mode.)
15. LCD displays the phone number and the
icon disappears when
registered.
Confirm Emergency
Emergency Representative Code (see note 2):
16.Confirm correct Emergency Code provisioning by locking the key-
pad: From standby screen, press
for 2 seconds.
17.In standby screen should now be showing "Key Lock", now press
SOS
(right softkey) Key. The numbers from the iPECS`s Emergency
Table should now be options on the screen. Calls to the emergency
services can be tested by selecting the number and pressing the .
Press
to return to standby screen.
18.Unlocking the keypad: From standby screen, press
for 2 seconds.
19.Repeat process if Emergency Representative Table entries did not
appear.
Emergency Digitmap Code (see note 2):
20.Confirm correct Emergency Digitmap Code provisioning by locking
the Call:
Menu
,
,
, enter code "0000", press ,
,
. (Use
to exit or return to standby mode.)
