LG-Ericsson LIP-9070, User Manual

Page: 124 / 197

INTERNAL
LIP-9070 User guide 03/09/2013
Page 124of
13.2.3.3 Using System Speed Dial Numbers
The iPECS-100 system has memory allocated for 800 System Speed Dial numbers (bins 200-999).
The iPECS-300 system has memory allocated for 3000 System Speed Dial numbers (bins 2000-4999).
The iPECS-600 system has memory allocated for 6000 System Speed Dial numbers (bins 2000-7999).
The iPECS-1200 system has memory allocated for 12000 System Speed Dial numbers (bins 20000-
31999). You may, if allowed, use System Speed Dial to call frequently dialed numbers.
In some cases, these numbers are divided into groups called System Speed Zone Groups. In this
case, you may access some numbers and not others and your dialing restrictions may be invoked.
Only an Attendant can assign System Speed Dial numbers.
13.2.3.4 Using and Entering Station Speed Dial Numbers
Each station in the iPECS-100 System is allocated memory for 20 Station Speed Dial numbers (bins
00-19) each up to 48 digits. The iPECS-300 & 600 &1200 support 100 Station Speed Dial numbers
(bins 000-099). These numbers are entered at the u
ser’s station and may include several ‘special’
instructions. Special instructions and the corresponding button are:
PAUSE will momentarily stop dialing.
FLASH as 1st digit
—Activate dial tone detect.
FLASH not as 1st digit
—The system will generate a flash on the CO line.
CALL BACK as 1st digit
—Send digits as ISDN Keypad Facility message.
‘*’ as 1st digit—Display Security, the stored number will not be displayed when used.
‘*’ not as 1st digit—Dial Pulse to Tone Switchover, the system will switch from pulse to
tone dialing.
When entering a Speed Dial, a 16-character name may be associated with the number for Dial by
Name. Characters are entered with QWERTY keyboard.
To place a call using System Speed Dial:

Lift the handset,

Press the SPEED button,

Dial the desired System Speed Dial bin number