LG-Ericsson LIP-9070, User Manual

Page: 115 / 197

INTERNAL
LIP-9070 User guide 03/09/2013
Page 115of
13 Calls
13.1 Receiving calls
13.1.1 Answering a Call While Idle
There are 3 basic types of incoming calls; internal/external ringing calls, Intercom Voice Announce
calls, and Hold recalls.
Your phone may be assigned Ringing Line Preference ; in this case, calls that ring are answered by
lifting the handset. Otherwise, you must press the flashing Flex button.
External calls to an iPECS Phone will appear under the CO/IP line or a
LOOP button.
External calls are from CO lines or VoIP channels that are programmed to ring at your phone. For
external calls,
Delay Ring may be assigned allowing others to answer the call before the call rings at
your phone.
Calls can be forwarded in some manner from another user; if providing call coverage for other users,
you may also receive
Station Call Coverage calls.
Calls placed on Hold , including Transfers, parked calls, etc. will recall if left on hold for too long.
ICM Voice Announce calls are answered based on the ICM Signaling mode at the receiving phone;
in Hands-free (HF) mode, after the splash tone and announcement, speak normally into the
microphone. In the Privacy (PV) mode, lift the handset to respond. The
ICM Signaling mode can
be assigned in Station Programming .
The LCD will display the calling number or, if available, the name of the station or CO/VoIP line, CO
Line Name Display .
13.1.2 Responding to a Call While Busy
While you are busy on another call, you may receive a Muted Ring, Camp-On tone, or Voice-Over
announcement. Muted Ring is provided over the speaker of your Phone indicating a Call Waiting.
You also may receive Camp On tones, a burst of tone on top of the existing call, as an indication of
another call waiting.
While busy, certain stations can activate Voice-Over to your phone. In this case, audio is received
from both the active call and the Voice-Over announcement at the same time.
Respond to any of these Off-hook Signals in one of several ways; place the existing call on Hold and
respond to the new incoming call, activate One-time DND, send a Silent Text Message, or ignore the
new call.
Silent Text Message requires a
TEXT MESSAGE
button (not available on a SLT or other non-display
terminal).
The Attendant or Secretary may use Intrusion to announce a call while you are busy.
To answer a call ringing at your phone:

Lift the handset or press the flashing Flex button (as needed),
the call will be connected.
To respond to an Intercom Voice Announce call:

In HF mode, simply speak as normal into the microphone, OR

In PV mode, lift the handset to respond.
To answer a Call Waiting:

Press
HOLD
/
SAVE
, and/or

Press the flashing
CO
/
IP LINE
button.
To activate One-time DND:

Press the DND button.