LG-Ericsson LIP-9070, User Manual

Page: 116 / 197

INTERNAL
LIP-9070 User guide 03/09/2013
Page 116of
13.1.3 Using Answering Machine Emulation (AME)
When a call is connected to your voice mail, you can screen the call as if using a normal Answering
Machine. The caller’s voice is played over your speaker while the message is being recorded.
There are two methods of notification and call screening provided, Ring or Speaker mode.
Ring mode
—the Answering Machine Emulation (AME) Flex button will flash to notify you of a call.
You may press the Flex button to hear the caller as the voice message is stored.
Speaker mode
—when the call is sent to the voice mailbox, the caller’s voice is automatically
broadcast over the speaker of your iPECS Phone.
You may terminate screening, leaving the caller in voice mail to record a message, talk with the caller
and record the conversation in the mailbox, or answer the call and disconnect the Voicemail. The
AME feature is only available when using the iPECS VMIM/VSF Voice Mail; a M
UTE
and AME button
should be programmed (refer to Appendix A User Program Codes).
13.1.4 Differential Ring Signals
When multiple phones in a small area ring, it can be difficult to tell which are ringing. With the LIP-
9070
, 12 ring tones are available for differentiating one phone’s ringing from another. These tones
are stored on the phone’s permanent memory.
To select a Ring Tone from the system settings Menu:
Select Sounds,
Select ICM/CO Ring
For each ring select a Ring Tone.
13.1.5 Answering Calls at Night
In the Night mode, Loud Bell Control may be used to send ring signals to external bells. You may
answer these calls with Universal Night Answer (UNA).
To screen a call in Ring mode:

Press the flashing
AME
button, the caller’s voice is broadcast
over the station speaker and stored in the voice mailbox (in the
Speaker mode, broadcast is automatic).
To stop the voice broadcast and leave the caller in Voice Mail:

Press the illuminated
SPEAKER
button.
To talk with the caller and record the conversation in Voice Mail:

Press the
MUTE
button.
To answer the call and cancel the voice message recording:

Press the illuminated
AME
button, the caller is connected and
the Voice Mail disconnected.
To select a Ring Tone from phone memory:

Press the
TRANS
/
PGM
button,

Dial 1 for Ring Tones,

Dial 1 or 2 for Internal or External ring,

Dial 01-12 for the desired tone number; a confirmation tone is
heard,

Press
HOLD
/
SAVE
to make the selection.
To answer a call ringing during night mode:

Lift the handset,

Dial 567 ( UNA code) .