LG-Ericsson iPECS LIP-8008E User Manual Download | Manualshive

Page: 4 / 66

background image

LIP-8008E User Guide

[EU]

European Union Declarations of Conformity

Ericsson-LG Co., Ltd. declare that the equipment specified in this document
bearing the “ CE” mark conforms to the European Union Radio and
Telecommunications Terminal Equipment Directive(R&TTE 1999/5/EC),
including the Electromagnetic Compatibility Directive(2004/108/EC) and Low
Voltage Directive(2006/95/EC).
Copies of these Declarations of Conformity (DoCs) can be obtained by
contacting your local sales representative.

[USA/CSA]

FCC/IC Interference Statement

This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.



Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 /RSS-GEN of the FCC/IC rules. Operation is
subject to the following two conditions:
(1)This device may not cause harmful interference; and (2) This device must
accept any interference received, including interference that may cause
undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
The use of this device in a system operating either partially or completely
outdoors may require the user to obtain a license for the system according to the
Canadian regulations.

CAUTION :

Any changes or modifications in construction of this device which are not

expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.

«
...
2
3
4
5
6
...
»

Summary of Contents for iPECS LIP-8008E



































































Reviews:

No comments

Related manuals for iPECS LIP-8008E

Brand: Olympia Pages: 144

Brand: TCL Pages: 34

Brand: TCL Pages: 38

Brand: TCL Pages: 26

Brand: TCL Pages: 10

Brand: Azumi Pages: 31

Brand: Sony Ericsson Pages: 8

Brand: Grandstream Networks Pages: 25

Brand: QUO Pages: 16

Aeonix T200M Series

Brand: Tadiran Telecom Pages: 98

SUNBURST SGH-A697 Series

Brand: Samsung Pages: 185

Brand: Samsung Pages: 132

Brand: Samsung Pages: 142

Brand: LG Pages: 81

Brand: LG Pages: 2

Brand: LG Pages: 78

Brand: LG Pages: 128

Brand: LG Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands