LIP-8008E User Guide
22
If you are the Attendant or Secretary, you may activate
Intrusion
. You may also use
Step Call
; dial the next
station by dialing just the last digit of the Intercom
number.
3.1.2 To leave a Message Wait
If the called user does not answer or is in DND mode,
you may leave a
Message Wait
. The called user will
receive a Message Wait indication; the MSG LED will
flash.
3.2
External Calls
3.2.1 Placing external CO/VoIP calls
External calls are placed on CO/IP lines. These ‘lines’
are accessed either using a button on the iPECS Phone
assigned as a
CO/IP line
or using dial codes. The
CO/IP lines are grouped for different types of calls, local,
long distance, etc. Using the
CO/IP line group
code,
you will be able to access any line from the group. A
Flex button on the iPECS Phone assigned as a
LOOP
button lets you access a line from a group. Dial codes
for access to CO/IP lines are:
Individual CO/IP line access
88 + Line number (01-10 for iPECS SBG-1000, 01-42
for iPECS-50 & 100, 001-200 for iPECS-300, 001-
400 for iPECS-600, or 001-600 for iPECS-1200).
To Camp-On (wait off-hook) for a busy station:
•
While placing a call to a busy station, dial * and wait for an
answer.
To Callback (wait on-hook) for a busy station:
•
While placing a call to a busy station, press the
CALL BACK
button and hang-up.
To make a Voice Over announcement to a busy station:
•
Dial #, and after the Splash tone is heard, begin speaking.
To activate Message Waiting:
•
Press the CALL
BACK button and hang-up.
